Ortofon - 2M Blue MM Cartridge Mounted on SH-4 Headshell
Ortofon - 2M Blue MM Cartridge Mounted on SH-4 Headshell
2M Blue Premounted
The goal of any cartridge should be to reproduce sound as closely to the artist's vision as possible, and the 2M Blue takes you further on this journey toward authenticity. The 2M Blue is mounted on our classic SH-4 headshell, making the setup process easy.
Travelling to the moment the music was recorded
Accuracy level
The goal for any cartridge should be to reproduce the sound as close to the artist's vision as possible, and the 2M Blue takes you further on this journey of authenticity. With the 2M Blue, you get serious about listening to vinyl.
It's never been easier to experience
Compatibility
Experience the convenience of the 2M Blue Premounted – a smart and refined choice for those seeking straightforward installation and effortless replacement on their S-shaped tonearm. The SH-4 headshell's resilience and stability are enhanced by its slender and refined design. A robust yet lightweight construction, coupled with an ergonomic, extended finger lift, ensures easy handling and pickup.
Nude Elliptical stylus
Stylus
The Nude diamond is cut in an Elliptical shape, and when it hits the groove it is like travelling through both space and time to the very moment the music was recorded.
High level of sonic accuracy
Output
The engine provides an increased output of 5.5 mV optimized sound reproduction and a high level of sonic accuracy. The 2M Blue adds more dynamics and resolution, sounds more open, and reproduces more details compared to the 2M Red model.
Specifications
-
Channel balance at 1 kHz1.5 dB
-
Output voltage at 1 kHz, 5cm/sec5.5 mV
-
Channel seperation at 1 kHz25 dB
-
Channel seperation at 15 kHz15 dB
-
Frequency response 20 Hz - 20 kHz2 / - 1 dB
-
Tracking ability at 315Hz at recommended tracking force80 µm
-
Compliance, dynamic, lateral20 µm/mN
-
Stylus typeNude Elliptical
-
Stylus tip radiusr/R 8/18 µm
-
Tracking force range1.6-2.0 g (16-20 mN)
-
Tracking force, recommended1.8 g (18 mN)
-
Tracking angle20°
-
Internal impedance, DC resistance1.3 kOhm
-
Cartridge colourBlack/Blue
-
Cartridge weight7.2 g
-
Premounted cartridge weight16.7 g
-
Recommended load resistance47 kOhm
-
Internal inductance700 mH
-
Recommended load capacitance150-300 pF